Installation guide

4
Installing a DECarray Cabinet
This chapter describes how to install the DECarray cabinet in a single-system
or DSSI VAXcluster configuration.
Digital Services or trained installers must perform these procedures.
Make sure that all precautions for site preparation have been completed. Refer
to Chapter 2.
Perform the installation only after you have completed all the steps in
Chapter 3.
WARNING
Hazardous voltages are in the storage array and in the components of
the storage array.
When performing any operation involving the power source, turn off
the power controls of all components and on the power controller.
Disconnect the power cable from the source outlet. Perform the
operation, then reconnect the power cable to the source.
Installing a DECarray Cabinet 4–1