Installation guide

Unpacking the DECarray
3.4 Leveling the DECarray Cabinet
3.4 Leveling the DECarray Cabinet
Once the array is in its final position:
1. Loosen the locknuts on all four leveler feet (Figure 3–7).
2. Turn each leveler hex nut clockwise until the leveler foot contacts the floor.
3. Adjust all four feet until the cabinet is level and the load is removed from
all casters. Verify that the casters spin freely.
4. Tighten the locknuts on all four leveler feet (Figure 3–7).
Figure 3–7 Adjusting Leveler Feet
LOCKNUT
LEVELER
HEX NUT
LEVELER
FOOT
CXO-395C_S
SHR_X1105_89_SCN
3–10 Unpacking the DECarray