Installation guide

Unpacking the DECarray
3.2 Removing the DECarray from the Pallet
7. Position the unloading ramps on the pallet by fitting the grooved end of
each ramp over the metal mating strip on the pallet.
8. Screw the cabinet levelers all the way up until the storage array cabinet
rests on its rollers on the pallet.
9. Loosen the locking nuts on all four leveler feet.
10. Carefully roll the DECarray cabinet down the ramps. Three people are
required to unload the DECarray from the shipping pallet (Figure 3–3).
Figure 3–3 Storage Array Removal from the Pallet
CXO-924A_S
SHR_X1104_89_SCN
3–6 Unpacking the DECarray