Installation guide

DECarray
installation of (cont’d)
DSSI VAXcluster configuration, 4–28,
D–16
SF3x storage enclosure in, 5–1
SF7x storage enclosure in, 6–1
single-system configuration, 4–16,
D–2
stripeset, 4–39
universal mounting kit H229 in, 7–1
installation of, with VAX 4000, D–1
installation of magazine tape ISE, 8–1
labeling
DSSI VAXcluster configuration, 4–32
single-system configuration, 4–20
stripeset configuration, 4–41
leveling, 3–6, 3–10
placement of, 3–7
powering up
DSSI VAXcluster configuration, 4–37
single-system configuration, 4–25
preparing a site for, 2–1
preparing for magazine tape ISE
installation, 8–10
preparing for SF3x installation, 5–10
preparing for SF7x installation, 6–10
recommended environmental limits, 1–4
single-system configuration, D–2
single-system configurations, 4–2
unloading procedures, 3–3
unpacking, 3–2
DECarray overview, 1–1 to 1–5
DSSI bus meter, 9–3, 9–4
DSSI ID
switch settings
SF3x, 5–22
SF7x, 6–24
verification of
for DSSI VAXcluster configuration,
D–19
for single-system configuration, 4–12,
D–5
DSSI terminators
illustration of
DSSI terminators
illustration of (cont’d)
for DSSI VAXcluster configuration,
4–31, D–22
for single-system configuration, 4–18,
D–8
installation of
for single-system configuration, 4–19,
D–9
placement of
for single-system configuration, 4–19,
D–9
DSSI VAXcluster configuration
See also Converting to DSSI VAXcluster
configuration
cabling a magazine tape ISE, 8–30
cabling an SF7x for, 6–44
converting to, C–1
description of, 4–5, D–16
E
ESD, electrostatic discharge, 3–2
H
Hardware installation procedures
magazine tape ISE, 8–12
SF3x storage enclosure, 5–12
SF7x storage enclosure, 6–12
I
Inspection, 8–4
of DECarray, 3–11
of ramps, 3–3
of shipped equipment, 3–2, 5–2, 6–4
Installation
of DECarray, 2–1, 4–1, D–1
of disk ISE into SF3x-HK storage
enclosure, B–3
of disk ISE into SF7x-UK storage
enclosure, B–6
of magazine tape ISE, 8–1
of SF3x storage enclosure, 5–1
of SF7x storage enclosure, 6–1
Index–2