Installation guide

Unpacking the DECarray

3.2 Removing the DECarray from the Pallet

This section describes the procedure for removing the DECarray cabinet from

the pallet and leveling it.

WARNING

Serious personal injury may result if correct safety conditions are not

met. During the unpacking procedure, personnel should wear safety

glasses. Inspect the ramps, ramp side rails, and metal hardware for

the following defects:

• Cracks more than 25 percent of the ramp depth, either across or

lengthwise on the ramp

• Knots or knotholes going through the thickness of the ramp and

greater than 50 percent of the ramp width

• Loose, missing, or broken ramp side rails

• Loose, missing, or bent metal hardware

If any of these defects exist, DO NOT USE THAT RAMP. Investigate

alternate means of removing the array or order a new ramp. The part

number for the left ramp is 99–07689–01. The part number for the

right ramp is 99–07689–02.

Unpacking the DECarray 3–3