Installation guide

Installing a DECarray with a VAX 4000 System
D.2 DSSI VAXcluster Installation of a DECarray
D.2.2.2 Completing the System Configuration Sheet (DSSI VAXcluster)
Fill out the system configuration sheet (Figure D–12). The information from
the system configuration sheet is used to fill out the labels correctly for all
DSSI cables, enclosure OCPs, and ISEs.
Note
Do not attempt to fill out and place the labels until you have completed
the system configuration sheet.
Refer to the inside cover of the SF Family Label Booklet for instructions on
filling out these labels.
D–26 Installing a DECarray with a VAX 4000 System