Installation guide

Installing a DECarray with a VAX 4000 System

D.1 Single-System Installation of a DECarray

D.1.2.2 Completing the System Conﬁguration Sheet (Single-System)

Fill out the system conﬁguration sheet (Figure D–6). The information from the

system conﬁguration sheet is used to ﬁll out the labels correctly for all DSSI

cables, enclosure OCPs, and ISEs.

Note

Do not attempt to ﬁll out and place the labels until you have completed

the system conﬁguration sheet.

Refer to the inside cover of the SF Family Label Booklet for instructions on

ﬁlling out the labels.

Installing a DECarray with a VAX 4000 System D–13