Installation guide

Installing an SF3x-HK and SF7x-UK Upgrade Kit
B.3 Installing an RF7x ISE into an SF7x-HK Storage Enclosure
b. Position the disk ISE as shown in Figure B–3 and install the disk ISE in
the enclosure. Slide the disk ISE gently into place, while holding all cables
out of the way. Do not force the disk ISE.
Figure B–3 RF7x Disk ISE Orientation
NOTE TO
ILLUSTRATOR:
front panel for this
hardware is SHR_X1127_89
ISOL and reduced
17/64 (.265625)
Write
Protect
Fault
DSSI
ID
Write
Protect
Ready
Fault
DSSI
ID
d
i gi
t
a l
Ready
NOTE TO ILLUSTRATOR:
This was created by
rotating SHR_x1074A_89_SCN
RW,Z120
SHR-X0128-90-SCN
THIS REPRESENTS
A RF72
SHR-X0135-90
SHR-X0136A-90
RF7X
SKID PLATE
RETAINING CLIP
SKID PLATE
SKID PLATE
RETAINING TAB
LOCATION
SKID PLATE
GUIDE
MA-0421-92.DG
Installing an SF3x-HK and SF7x-UK Upgrade Kit B–9