Installation guide

Installing an SF3x-HK and SF7x-UK Upgrade Kit
B.2 Installing an RF3x ISE into an SF3x-HK Storage Enclosure
2. Install the disk ISEs.
CAUTION
Take all possible ESD precautions when handling the disk ISEs. Wear
a correctly grounded ESD strap.
a. Remove the SF3x storage enclosure front cover.
b. Position the disk ISE as shown in Figure B–1 and install the disk ISE in
the enclosure. Slide the disk ISE gently into place, push lever to the side
to fully engage drive, install screw to secure drive.
B–4 Installing an SF3x-HK and SF7x-UK Upgrade Kit