Installation guide

DECarray Cabling Information
A.2 DSSI VAXcluster Configurations
A.2 DSSI VAXcluster Configurations
Table A–2 contains cabling information for DECarray variations in a DSSI
VAXcluster configuration.
Note the following:
• DSSI bus termination is supplied by the KFMSA modules installed in each
host system.
• All KFMSA modules installed in each host system must be set to the same
DSSI ID.
• All SF7x storage enclosures operate in through-bus mode.
A–12 DECarray Cabling Information