Installation guide

Installation Troubleshooting
9.1 Troubleshooting the Storage Enclosure
Table 9–1 (Cont.) Troubleshooting Chart
Symptom(s) Probable Cause(s) Corrective Action(s)
Fan is not spinning and
power supply LED is lit.
1. Bad power supply. 1. Replace power supply.
2. Bad fan. 2. Replace fan.
3. Bad transition
module.
3. Configure a new transition
module and replace.
Fan is not spinning and
power supply LED is not
lit, but storage enclosure
is on.
1. Bad power supply. 1. Replace power supply.
2. Bad power cord. 2. Replace cord.
3. Bad transition
module.
3. Configure a new transition
module and replace.
(continued on next page)
Installation Troubleshooting 9–5