Installation guide

Installing the Magazine Tape ISE in a DECarray Cabinet
8.4 Labeling the DSSI Cables and Magazine Tape ISE
8.4.1 Filling Out the Labels
Refer to the inside cover of the SF Family Label Booklet for instructions on
filling out the labels for the DSSI cables and TF8x7 operator control panels.
8.4.2 Labeling the Cables
For each cable you just installed, place a label four inches behind the connector
as shown in Figure 8–15.
Figure 8–15 Placing a Label on a DSSI Cable
LABEL
SHR-X0108-90
8.4.3 Labeling the Magazine Tape ISE
Place the labels for the front panel of the magazine tape ISE as shown in
Figure 8–16.
Installing the Magazine Tape ISE in a DECarray Cabinet 8–37