Installation guide

Installing the Magazine Tape ISE in a DECarray Cabinet
8.1 Installing the TF8x7 Storage Enclosure
Note
Do NOT tighten the screws at this time.
Figure 8–6 Installing the Weldment Brackets
NOTE:
This illustration
reduced 50%
of original CAD
LOCK WASHER (2)
90-06637-00
TOP WELDMENT
70-26052-01
BOTTOM WELDMENT
70-26052-02
SLIDE MOUNT
GUIDE PINS
1/2-INCH
SHOULDER
SCREW (2)
12-24007-01
SHR-X0131A-90
8–16 Installing the Magazine Tape ISE in a DECarray Cabinet