Installation guide

Installing the Magazine Tape ISE in a DECarray Cabinet
8.1 Installing the TF8x7 Storage Enclosure
8.1.4.1 Preparing the DECarray Cabinet
The following procedure describes how to prepare the DECarray cabinet to
receive the magazine tape ISE:
1. Place the magazine tape ISE to be installed to one side, in front of the
cabinet.
2. Open front and rear doors of the DECarray (Figure 8–3).
3. Remove the front door filler panel for the position where you are installing
the magazine tape ISE (Figure 8–3).
8–10 Installing the Magazine Tape ISE in a DECarray Cabinet