Installation guide

Installing the Magazine Tape ISE in a DECarray Cabinet
8.1 Installing the TF8x7 Storage Enclosure
8.1.2 Where to Install the Magazine Tape ISE
The third level of the DECarray cabinet is reserved for magazine tape ISEs.
Facing the front of the cabinet, position 5 is on the left, and position 6 is on the
right.
8.1.3 Completing the System Configuration Sheet
Locate the system configuration sheet. If you cannot locate this sheet or if the
one that is available is either not filled out or filled out incorrectly, fill one out
before continuing with the installation procedure.
Figures 8–1 and 8–2 show examples of the system configuration sheet.
8–6 Installing the Magazine Tape ISE in a DECarray Cabinet