Installation guide

8
Installing the Magazine Tape ISE in a
DECarray Cabinet
This chapter describes how to install the magazine tape ISE in a DECarray
cabinet. The following procedures are described:
• Installing the TF8x7 Storage Enclosure (Section 8.1)
• Cabling (Section 8.2)
Single-system configuration (Section 8.2.1)
DSSI VAXcluster configuration (Section 8.2.2)
• Power-up (Section 8.3)
• Labeling (Section 8.4)
• Final verification (Section 8.5)
One or two magazine tape ISEs can be installed in the DECarray cabinet.
Only Digital Customer Services and other installing personnel that have been
trained in ESD procedures can use the procedures in this chapter.
Installing the Magazine Tape ISE in a DECarray Cabinet 8–1