Installation guide

Installing the SF7x Storage Enclosure in a DECarray Cabinet
6.8 Labeling the DSSI Cables and OCP
6.8.1 Filling Out the Labels
Refer to the inside cover of the SF Family Label Booklet for instructions on
filling out labels for the DSSI cables and SF7x OCP.
6.8.2 Labeling the Cables
For each cable installed, place a label four inches behind the connector as
shown in Figure 6–21.
Figure 6–21 Placing a Label on a DSSI Cable
LABEL
SHR-X0108-90
6–54 Installing the SF7x Storage Enclosure in a DECarray Cabinet