Installation guide

Installing the SF7x Storage Enclosure in a DECarray Cabinet
6.5 Installation Procedure
8. At the front of the SF7x enclosure, make sure that all four drive dc power
switches are out (Figure 6–13).
9. At the rear of the SF7x enclosure, make sure that the ac power switch is in
off or in the 0 position (Figure 6–14).
10. Also check the select line voltage. Set it to the correct setting for your
application.
11. At this time, connect the ac power cord to the SF7x enclosure.
6–28 Installing the SF7x Storage Enclosure in a DECarray Cabinet