Installation guide

Installing the SF7x Storage Enclosure in a DECarray Cabinet
6.5 Installation Procedure
5. Position the OCP.
a. Adjust the SF7x OCP mount (Figure 6–10) to the LEFT for positions 1,
3, and 7, and to the RIGHT for positions 2, 4, and 8.
b. Check that this and all other OCPs and magazine tape ISE fronts
project through the front door of the DECarray correctly. It may be
necessary to adjust cabinet door mounting at the door hinges.
Figure 6–10 Adjusting the OCP
TRANSITION
BOARD
(BEHIND FRAME)
SLOTTED
HOLE
SLOTTED
HOLE
HOLE FOR
RIGHT
POSITION
HOLE FOR
LEFT
POSITION
TRANSITION
BOARD
SCREWS
SHR-X0124-90
Installing the SF7x Storage Enclosure in a DECarray Cabinet 6–23