Installation guide

Installing the SF7x Storage Enclosure in a DECarray Cabinet
6.5 Installation Procedure
l. From the front of the cabinet, install the upper and lower weldment
brackets on the cabinet side rail using 1/2-inch shoulder screws and
washers (Figure 6–6).
The center hole of the weldment bracket goes over the guide pin on the
slide mount so the large end of the top weldment bracket points up and
the large end of the bottom weldment bracket points down, regardless
of whether you are installing the brackets on the front right or left
cabinet frame rails.
Note
Do NOT tighten the screws at this time.
6–16 Installing the SF7x Storage Enclosure in a DECarray Cabinet