Installation guide

Installing the SF3x Storage Enclosure in a DECarray Cabinet
5.7 Labeling the DSSI Cables
5.7.1 Filling Out the Labels
Follow the steps on the inside of the SF Family Label Booklet for instructions
on how to fill out the labels for the DSSI cables and SF3x OCP.
5.7.2 Labeling the Cables
For each cable you just installed, place a label 4 inches behind the connector as
shown in Figure 5–21.
Figure 5–21 Positioning a Label on a DSSI Cable
LABEL
SHR-X0108-90
Installing the SF3x Storage Enclosure in a DECarray Cabinet 5–41