Installation guide

Installing the SF3x Storage Enclosure in a DECarray Cabinet
5.4 Installation Procedure
b. At the front of the cabinet, hoist the SF3x assembly by using the lifting
device or three people to lift the SF3x storage enclosure up and onto
the slide mount. Push the assembly halfway into the cabinet.
c. From the rear of the DECarray cabinet, pull the SF3x assembly all
the way onto the slide mount until the chassis retainers contact the
weldment brackets.
d. Install and tighten the two outer weldment bracket screws, then install
and tighten the two inner weldment bracket screws (Figure 5–10).
e. Tighten the upper and lower weldment 1/2-inch shoulder screws and
washers.
Installing the SF3x Storage Enclosure in a DECarray Cabinet 5–19