Installation guide

Installing the SF3x Storage Enclosure in a DECarray Cabinet
Table 5–1 SF3x Required Tool List
Description Part Number
Lifting device FC–10117–AC
#0 Phillips screwdriver 29–10991–00
#1 Phillips screwdriver 29–11001–00
#2 Phillips screwdriver 29–11005–00
1/8-inch slot screwdriver 29–10802–00
5/16-inch slot screwdriver 29–10960–00
1/8-inch hex key 29–26115–00
3/16-inch hex key 29–26118–00
11/32-inch nutdriver 29–10674–00
5.1 Unpacking the SF3x Storage Enclosure
Unpack the SF3x shipping container. The enclosure is shipped in an
environmental barrier bag.
Note
After unpacking, retain the container and all packing materials.
Examine the enclosure for physical damage. If you find any damage, do not
attempt to install the enclosure. Notify your office immediately.
If there is no damage, then unpack all the boxes and bags, and identify all the
parts by using Table 5–2.
5–2 Installing the SF3x Storage Enclosure in a DECarray Cabinet