Installation guide

Installing an SF200 Storage Array with a VAX 6000 Series System 4–43

4.4.3.2 Filling Out the Labels (Dual-Host)

There are two sizes of labels: the larger one for the DSSI cables, and the

smaller one for the inside of the SF72 OCP door and the system I/O panel.

Refer to the inside cover of the SF Family Label Booklet (part number

36–32882–01) for the instructions on what information to put on each of

the two types of labels.

For the dual-host conﬁguration, the following colored labels are to be used

on the SF72 OCP door, the front panel of the magazine tape subsystem,

and all DSSI cables.

Label Color Port/Position

Blue Port 1, positions 5 and 1, port 9

Red Port 2, positions 6 and 2, port 10

Yellow Port 3, position 3, port 11

Green Port 4, position 4, port 12

Blue with white strip Port 5, position 7, port 13

Red with white strip Port 6, position 8, port 14

Proceed once you have ﬁlled the cable and OCP labels according to the

instructions on the inside cover of the SF Family Label Booklet (part

number 36–32882–01).