Installation guide

Installation Procedures for an SF72-UK Upgrade Kit B–11

B.5 Bringing the New RF72 Disk ISEs On-Line

Refer to the KFMSA Module Installation and User Manual (EK–

KFMSA–IM) for the sections on conﬁguring a single-host and dual-host

conﬁguration.

Note that you will be instructed by these sections to perform the following

tasks:

• Boot VAS/DS on the host systems.

• Attach the KFMSA modules in each system.

• Select each KFMSA module in each system.

• Run EVCXE or EVCXF.

• Modify certain parameters in the disk ISEs.

• Ensure that all modiﬁed parameters are recorded as permanent

values.

• Verify the communication path with all ISEs on the DSSI buses.

After all of the above have been accomplished successfully, return the

systems and the SF200 storage array to normal operating mode.