Installation guide

Installation Procedures for an SF72-UK Upgrade Kit B–5
The following sections provide the steps to install the two-drive SF72-UK
upgrade to an SF72-HK storage enclosure with two RF72 disk drives.
The SF72-UK option includes the two RF72 disk ISEs to be installed in
the two front positions of an SF72-HK enclosure.
1. To unpack an RF72 disk ISE:
a. Open the shipping carton.
b. Remove the RF72 disk ISE wrapped in the protective wrapper.
c. Open the protective wrapper and remove the drive. Discard the
desiccant bags.
d. Place the drive on the protective wrapper.
2. Install the RF72 disk ISEs.
WARNING
Take all possible ESD precautions when handling the RF72
disk ISEs. Wear a correctly grounded ESD strap.
a. Remove the SF72 storage enclosure front cover (Figure B–1) by
loosening the screws and lifting the cover straight off.