Installation guide

B–4 Installation Procedures for an SF72-UK Upgrade Kit
B.3 Installing the RF72 Disk ISE Into an SF72-HK
Storage Enclosure
Use the following steps to install two RF72 disk ISEs into an SF72-HK
storage enclosure:
WARNING
Do not disconnect or disturb the existing DSSI cables and
terminators on the present SF72 storage enclosures, magazine
tape subsystems, or on the SF200 storage array I/O panel.
Customer data corruption could result.
WARNING
Take all possible ESD precautions when unpacking the RF72 disk
ISEs. Wear a correctly grounded ESD strap.
CAUTION
Only one SF72 storage enclosure inner assembly should be
extended on the slide mount at a time.