Installation guide

A–24 SF200 Storage Array Cabling Diagrams
A.2 Dual-Host Configuration
This section contains cabling diagrams for SF200 storage array variations
in the dual-host configuration.
Note the following:
• DSSI bus termination is supplied by the KFMSA modules installed in
each host system.
• All KFMSA modules installed in each host system must be set to the
same DSSI ID. DSSI ID 7 is used in one host system, and DSSI ID 6
is used in the other.
• All SF72 storage enclosures operate in through-bus mode.