Installation guide

7–8 Installation Troubleshooting
2. Remove the RF72 disk ISE.
a. Remove the SF72 enclosure front cover (Figure 7–2). Loosen the
screws and lift off the covers.
b. Loosen the wedges on the disk ISE.
SHR-X0126A-90
Write
Protect
Fault
DSSI
ID
Write
Protect
Ready Fault
DSSI
ID
d
i g i
t
a l
Ready
OPERATOR CONTROL PANEL (OCP)
FRONT COVER
CAPTIVE SCREWS
DRIVE DC POWER SWITCHES
ENCLOSURE
CAPTIVE SCREWS
FRONT COVER
DOOR
Figure 7–2 SF72 Front Cover Removal