Installation guide

Installing the Magazine Tape Subsystem in an SF200 Storage Array 6–5
Table 6–2 Magazine Tape Subsystem Kit Contents
Description QuantityPart Number
Magazine tape subsystem 1 Subsystem specific
Hardware mounting assembly 1 subsystem specific
Slide mount assembly 1 –
1
Weldment bracket (front top) 1 70–26052–01
Weldment bracket (front bottom) 1 70–26052–02
Shoulder screw, 10-32. 0.500 4 12–24007–01
Shoulder screw, 10-32, 0.438 6 12–24007–02
Lock washer, internal steel 10 90–06637–00
DSSI cable retainer 1 74–41302–01
Chassis retainer 2 74–35858–01
10-32 Phillips (SEMS) 4 12–21368–03
Machine screw, Phillips, 0.500 2 90–06073–02
Machine screw, Phillips, 1.5 2 90–06079–03
Lock washer, external steel 2 90–07651–00
AC power cord, 8-foot 1 17–00442–03
DSSI cables, 42-inch, box-to-box 1 BC21Q–3F
Owner’s manual 1 EK–SF72S–OM
Installation guide 1 EK–SF200–IG
Subsystem owner’s manual 1 Subsystem specific
Label Booklet 1 36–32882–01
1
The slide mount assembly comes assembled and does not have a single part number.