Installation guide

5–36 Installing the SF72 Storage Enclosure in an SF200 Storage Array

7. While viewing the front of the I/O panel, note that the DSSI connector

on the left is KFMSA DSSI bus 2 and the DSSI connector on the right

is KFMSA DSSI bus 1. These connectors should be labeled YELLOW

for bus 1 and GREEN for bus 2.

If these connectors are not labeled, label them now with the small colored

labels in the SF Family Label Booklet (part number 36–32882–01).

For the single-host conﬁguration, use the BLUE, RED, YELLOW, and

GREEN labels only.