Installation guide

5–24 Installing the SF72 Storage Enclosure in an SF200 Storage Array
5. Position the OCP.
a. Adjust the SF72 OCP mount (Figure 5–11) to the LEFT for
positions 1, 3, and 7, and to the RIGHT for positions 2, 4, and 8.
b. Check that this and all other OCPs and magazine tape subsystem
fronts project through the front door of the storage array correctly.
It maybe necessary to adjust cabinet door mounting at the door
hinges.
TRANSITION
BOARD
(BEHIND FRAME)
SLOTTED
HOLE
SLOTTED
HOLE
HOLE FOR
RIGHT
POSITION
HOLE FOR
LEFT
POSITION
TRANSITION
BOARD
SCREWS
SHR-X0124-90
Figure 5–11 Adjusting the OCP