Installation guide

5–12 Installing the SF72 Storage Enclosure in an SF200 Storage Array
5.1.4.1 Preparing the SF200 Storage Array
The following procedure describes how to prepare the array to receive the
SF72 storage enclosure(s):
1. Place the SF72 to be installed to one side, in front of the array cabinet.
2. Open the front and rear doors of the storage array (Figure 5–4).
3. Remove the front door filler panel that corresponds to the position of
the storage array you are installing (Figure 5–4).
SHR_X1108A_89
SF72 FILLER PANEL
TF FILLER PANEL
Figure 5–4 Removing a Filler Panel