Installation guide

x Contents
7–2 SF72 Front Cover Removal . . . . . . . . . . . . . . . . . . . . . . . . . . 7–8
7–3 Disconnecting the Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7–9
7–4 RF72 Disk ISE Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7–10
7–5 RF72 Wedges and Skid Plate . . . . . . . . . . . . . . . . . . . . . . . . . 7–11
7–6 RF72 Disk ISE Orientation . . . . . . . . . . . . . . . . . . . . . . . . . . 7–12
7–7 Cabling the RF72 Disk ISE . . . . . . . . . . . . . . . . . . . . . . . . . . 7–13
7–8 SF72 Front Cover Replacement . . . . . . . . . . . . . . . . . . . . . . . 7–14
A–1 SF200-BA/BD and SF200-CA/CD Variants . . . . . . . . . . . . . . . A–4
A–2 SF200-FA/FD Variants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A–7
A–3 SF200-HA/HD Variants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A–10
A–4 SF200-HA/HD Variants, with One SF72 . . . . . . . . . . . . . . . . A–13
A–5 SF200-HA/HD Variants, with Two SF72s . . . . . . . . . . . . . . . . A–16
A–6 SF200-JA/JD Variants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A–19
A–7 SF200-TA/TD Variants (Magazine Tape Subsystems Only) . . A–22
A–8 SF200-BE/BH and SF200-CE/CH Variants . . . . . . . . . . . . . . A–25
A–9 SF200-FE/FH Variants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A–28
A–10 SF200-HE/HH Variants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A–31
A–11 SF200-HE/HH Variants, with One SF72 . . . . . . . . . . . . . . . . A–34
A–12 SF200-HE/HH Variants, with Two SF72s . . . . . . . . . . . . . . . A–37
A–13 SF200-JE/JH Variants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A–40
A–14 SF200-TA/TD Variants (Magazine Tape Subsystems Only) . . A–43
B–1 SF72 Front Cover Removal . . . . . . . . . . . . . . . . . . . . . . . . . . B–6
B–2 RF72 Disk ISE Orientation . . . . . . . . . . . . . . . . . . . . . . . . . . B–7
B–3 Cabling the RF72 Disk ISE . . . . . . . . . . . . . . . . . . . . . . . . . . B–8
B–4 SF72 Front Cover Replacement . . . . . . . . . . . . . . . . . . . . . . . B–9
C–1 Example of a Single-Host System Configuration Sheet . . . . . C–3
C–2 Changing an SF72 to Through-Bus Mode . . . . . . . . . . . . . . . C–7
C–3 Possible Single-Host Bus Configurations . . . . . . . . . . . . . . . . C–9
C–4 Possible Dual-Host Bus Configurations . . . . . . . . . . . . . . . . . C–10
C–5 How to Connect DSSI Cables on the SF200 I/O Panel . . . . . . C–13
C–6 Blank Dual-Host System Configuration Sheet . . . . . . . . . . . . C–15
C–7 Placing a Label on a DSSI Cable . . . . . . . . . . . . . . . . . . . . . . C–17
C–8 Placing a Label on the OCP Door. . . . . . . . . . . . . . . . . . . . . . C–18
C–9 OCP Indicators and Controls . . . . . . . . . . . . . . . . . . . . . . . . . C–20