User manual

Chapter 5 – Monitoring Features
PS-2000B Series User Manual
5–18


 Error Messages
This section describes the error messages of the Pro-Server that are displayed for
the errors caused during device read/write operations. The following table lists the
error codes for the RAS feature.
For error messages other than listed above, refer to "Pro-Server with
Pro-Studio for Windows Operation Manual".
5.3.5 Restrictions
The following table lists the features of Pro-Server that are supported by the PS-B.
For the details of each feature, refer to "Pro-Server with Pro-Studio for Windows
Operation Manual".
1. Pro-Server with Pro-Studio Ver.4.0 or higher is required.
Decimal
Number
Hexadecimal
Number
9530 253Ah RAS Initialization Error
9531 253Bh Command not supported.
9532 253Ch Access type not supported.
9533 253Dh Read/Write type not supported.
9534 253Eh Access to the device rejected.
9535 253Fh Value setting to the device/retrieval failed.
65535
(No Code)
ffffh
Returned when read/write of invalid values or unsupported
device is performed for Voltage, Temperature, and
number of revolution of the FAN.
Error Code
Error Message
Pro-Server Feature

: Supported
x: Not Supported
DDE Feature

Simplified DLL Feature (ProEasy.dll) Listed Separately
OPC Server Interface

SRAM Backup Data x
Action Feature x
Distribution Feature x
Data Viewer

*1
VBA Feature Assist

Device Data Backup/Restore Feature

Capture Screen Save Feature x
Security Feature

Device Monitor

Status Monitor x
Read Time Measurement
