User manual

Chapter 5 – Monitoring Features
PS-2000B Series User Manual
5–16
For the details of Read/Write to the devices and access proce-
dures, refer to the "List of Device Addresses" below.


 List of Device Addresses
1. When monitoring the voltage with the device monitor, the unit is "mV".
2. When monitoring the voltage with the device monitor, the unit is "rpm".
3. When monitoring the voltage with the device monitor, the unit is "°C".
4. Used for the system to read/write the data and perform monitoring operation.
5. Shuts down and restarts the operation system on the client PS-B.
6. Indicates the error event that is being monitored by the PS-B.
7. -5V Voltage is ffff(hex), 65535 (decimal).
Device
Device
Type
Device
Symbol
Read/
Write
Bit Access
16-bit
Access
32-bit
Access
CPU Voltage
*1
WORD VLT0
+3.3V Voltage
*1
WORD VLT1
+5V Voltage
*1
WORD VLT2
+12V Voltage
*1
WORD VLT3
-5V Voltage
*1*7
WORD VLT4
-12V Voltage
*1
WORD VLT5
VIT Voltage
*1
WORD VLT6
Number of Revolution of
CPU FAN
*2
WORD FAN0
Number of Revolution of
Power FAN
*2
WORD FAN1
CPU Temperature
*3
WORD TMP0
System Temperature
*3
WORD TMP1
DIN WORD DIN DIN00-DIN01 DIN0
DOUT WORD DOUT
Read/
Write
DOUT00 DOUT0
Error Event WORD ERR Read ERR00-ERR0E ERR0
Internal Memory Area
*4
WORD LS
LS00000-LS0000F to
LS02550-LS0255F
LS0000 to
LS0255
LS0000 to
LS0254
Shared Memory WORD PL
PL00000-PL0000F to
PL02550-PL0255F
PL0000 to
PL0255
PL0000 to
PLS0254
Software Reset Port
*5
WORD RST — RST0 —
Error Mask
*6
WORD ERRM Read ERRM00-ERRM0E ERRM0 —
—
—
READ
Read/
Write
TMP
VLT
FAN