User manual

PS-2000B Series User Manual
5–13
Chapter 5 – Monitoring Features
5.3 Remote RAS
The Remote RAS feature uses the Pro-face's Pro-Server with Pro-Studio (op-
tional) installed in the host PC to monitor and control the System Monitor/RAS
feature of the PS-B.
Pro-Server with Pro-Studio Ver.3.12 of higher is required to use the Remote RAS
feature. When using this feature, refer to the installation guides provided with the
Pro-Server as well as this manual.
5.3.1 System Configuration
The system employing this feature is configured as illustrated below.
5.3.2 Installation Procedures
On the server PC, start up the "Setup.exe" file in the [RASSvr] folder on the
accessory CD-ROM, and then install the program by following the instructions on
the screen.
Two-way feature
Server PC
Ethernet
Client PS-B
[System Monitor/RAS Feature]
• PSB_Smon.exe
• PSB_Wps.exe
• PSB_loc.dll
• PSB_DLL.dll
• PSB_Ras.dll
• PSSymon.sys
User Application
Pro-Server with Pro-Studio Ver.3.12 or higher
Remote RAS Server Program (PSB_RAS.npj)