User manual

Chapter 5 – Monitoring Features
PS-2000B Series User Manual
5–10
5.2.4 Error Messages
This section describes the error message and closing messages displayed on the
System Monitor and System Monitor Property screens.


 System Monitor


 Error Pop-up Message
When an error occurs while the "Popup Message" option is enabled for Error
Action, the following messages appears on the pop-up screen output screen
under the factory-configured settings.
The messages displayed on the pop-up message output
screen can be modified on the System Monitor Property
screen.


 Driver Operation Error
"The System Monitor driver not found."
"Install the latest driver."


 Driver Version Error
"The old System Monitor driver version."
"Update the driver."
Once an error is detected, the System Monitor holds the "error" status.
(Displays the icon indicating the error status.) To recover from the error
status, press the [Reset] button on the System Monitor screen, of turn
off the PS-B, perform maintenance service for removing the cause of
the error, and then turn on the power again.
Error-generating Item Message
CPU Voltage "CPU Power Supply Error"
CPU Voltage 2 "VIT Power Supply Error"
+3.3 V Voltage "+3.3V Power Supply Error"
+5.0 V Voltage "+5.0V Power Supply Error"
+12 V Voltage "+12V Power Supply Error"
-12 V Voltage "-12V Power Supply Error"
Power FAN "Power FAN Error"
CPU FAN "CPU FAN Error"
System Temperature "System Temperature Error"
CPU Temperature "CPU Temperature Error"
DIN0 "Input DIN0"
DIN1 "Input DIN1"
DIN2 "Input DIN2"
DIN3 "Input DIN3"
Watchdog Timer "Watchdog Timer Error"
Mirror Disk "A Mirror disk error is occurred"
SMART "SMART Error"