User manual

PS-2000B Series User Manual
5–7
Chapter 5 – Monitoring Features
5.2.2 System Monitoring Property Settings (PSB_Wps.exe)
The System Monitor Property screen allows you to configure the operating settings that
are activated when system conditions exceed the allowable range (when an error
occurs) of each monitoring device specified on the [System Monitor Setup] menu on the
System Setup screen.
The following table lists the operating settings that can be configured for each feature.
1. The Remote Reset feature setting is selectable only between Enable and Disable.
The following table lists the description of each operation.
The following is the overview of the System Monitor Property setting screen.
Set up the timer.
Enter the message
to be displayed as a
pop-up message.
Specify the operation
to be performed
when the condition
exceeds the allow-
able range.
Enable of disable
the feature.
Operation
Feature
Watchdog Timer

DIN

x

Voltage

x

Fan

x

Temperature

x

Remote Reset
*1
xxxxxx
Mirror Disk

xxx
SMART

xx

LED

: Setting available x: Setting not available
DOUT Buzzer
Popup
Me ssage
OS
Shutdown
OS
Restart
Item Description of the Operation
DOUT Outputs signals from DOUT of the RAS interface.
Buzzer
Sounds a beep as an alarm. (Cannot be set up when a checkmark is put to
the "OS Shutdown" checkbox.
Pop-up Message
Displays error messages as pop-up messages. (The messages pop up on
the screen.)
OS Shutdown Shuts down the operating system.
OS Restart Restarts the operating system.
Enable
Select or deselect this option to enable or disable each setting of the
monitoring feature.
LED The front orange LED lights