User manual

Chapter 5 – Monitoring Features
PS-2000B Series User Manual
5–6
5.2 System Monitor/RAS Features
5.2.1 Setup Procedures
Follow the steps below to enable the System Monitor/RAS features.
Via System Monitor Setup Screen
Use the [System Monitor Setup]
menu's System Setup screen to
enable or disable monitoring
features.
3.2.10 System
Monitor Setup
Via Applications
Start the PS-B unit's OS and start
up the System Monitor Property
using the [Start] ->[Programs]->
[System Monitor]->[System
Monitor Property] commands.
Next, set the processing to be
performed when a System Moni-
tor/RAS event occurs.
System status can be monitored at
any time via the System Monitor. Se-
lect [Start] -> [Program] -> [System
Monitor].
Administrator Authentication
is required for executing
SMART Monitoring. When a
user who does not have the
administrator authentication
logs in, nothing is displayed
in the item of SMART.
↑↓→←: Move Enter:Select +/-/PU/PD:Value F10:Save ESC•FExit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
Item Help
Menu Level 4
Shutdown Temperature [Disabled]
System Warning Temperature [Disabled]
CPU Warning Temperature [Disabled]
Warning Voltage Vcore A [Disabled]
Warning Voltage Vcore B [Disabled]
Warning Voltage +3.3V [Disabled]
Warning Voltage +5V [Disabled]
Warning Voltage +12V [Disabled]
Warning Voltage -12V [Disabled]
CPU FAN Speed Limit [Disabled]
Power FAN Speed Limit [Disabled]
Phoenix - AwardBIOS CMOS Setup Utility
System Monitor Setup