User manual

PS-2000B Series User Manual
4–9
Chapter 4 – Setting up Your PS-B Unit
4.5.2 Uninterrupted Power Supply System (UPS)
Be sure to shut down your OS before turning off your machine. Also, use of an
uninterrupted power supply is recommended to protect your data from accidental
power failures.
An uninterrupted power supply will give you sufficient time to shut down your
system safely in case of a power failure, and can even be set up to automatically
shut down your Windows
®
OS.
The PS-B unit, however, cannot be used with a 2-Step Inverter Output type unin-
terrupted power supply. Be sure the unit is a sine-output type power supply.
For details, consult your local UPS system dealer.
4.5.3 Changing System Settings
Your Windows
®
system's configuration settings will need to be changed when the
PS-B unit is connected to a LAN network or printer.


 Changing the System Configuration Settings
When the Windows
®
system configuration settings are changed, the following
message appears.
Enter the name of the folder where you will save the configuration changes and
click [OK].
• Insert the CD labeled "Windows
®
xx
*1
Professional CD-ROM" in the
CD-ROM drive (D: ), and click [OK].
• When copying the file from other locations such as a floppy disk or
network server, also click the [OK] button.
• When Your PS-B has No Preinstalled OS
Double-click the [I386] folder in the Windows
®
CD-ROM.
D:\I386 (When the CD-ROM drive is "D")
• When Your PS-B has a Preinstalled OS
C:\Proface\Setup\I386
1. "xx" is your OS.
Example) When using Windows
®
XP: "Windows
®
XP Professional CD-ROM"