User manual

Chapter 3 - System Setup
PS-2000B Series User Manual 3-19


 Warning Voltage +3.3V
When enabled, this setting designates that a warning will be issued if the voltage
change exceeds +3.3V's designated range. The available settings are [+/-6%], [+/-
8%] and [Disabled]. The factory default setting is [Disabled].


 Warning Voltage +5V
When enabled, this setting designates that a warning will be issued if the voltage
change exceeds +5V's designated range. The available settings are [+/-6%], [+/-
8%] and [Disabled]. The factory default setting is [Disabled].


 Warning Voltage +12V
When enabled, this setting designates that a warning will be issued if the voltage
change exceeds +12V's designated range. The available settings are [+/-6%], [+/-
8%] and [Disabled]. The factory default setting is [Disabled].


 Warning Voltage -12V
When enabled, this setting designates that a warning will be issued if the voltage
change exceeds -12V's designated range. The available settings are [+/-6%], [+/-
8%] and [Disabled]. The factory default setting is [Disabled].


 CPU FAN Speed Limit
When enabled, this setting designates the allowed speed range reductions allowed
for CPU FAN. The available settings are [-30%], [-50%] and [Disabled]. The
factory default setting is [Disabled].


 Power FAN Speed Limit
When enabled, this setting designates the allowed speed range reductions allowed
for Power FAN. The available settings are [-30%], [-50%] and [Disabled]. The
factory default setting is [Disabled].