User manual

Chapter 3 - System Setup
PS-2000B Series User Manual3-18
↑↓→←:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
Phoenix - AwardBIOS CMOS Setup Utility
System Monitor Setup
Item Help
Menu Level
Select PC Health Status from the System Monitor Setup and the following screen will
appear.


 CPU Warning Temperature
This setting designates the CPU temperature at which a warning will be issued.
The available settings are [70°C/158°F], [75°C/167°F], [80°C/176°F], [85°C/
185°F], [90°C/194°F] and [Disabled]. The factory default setting is [Disabled].
• When using a PentiumIII 1GHz CPU, select the [75°C/158°F] set-
ting. When using a Celeron 566MHz CPU, select the [90°C/194°F]
setting.


 System Warning Temperature
This setting designates the system temperature at which a warning will be issued.
The available settings are [70°C/158°F], [75°C/167°F], [80°C/176°F], [85°C/
185°F], [90°C/194°F] and [Disabled]. The factory default setting is [Disabled].


 Warning Voltage Vcore A
When enabled, this setting designates that a warning will be issued if the CPU
core voltage change exceeds that level. The available settings are [+/-6%], [+/-
8%] and [Disabled]. The factory default setting is [Disabled].


 Warning Voltage Vcore B
When enabled, this setting designates that a warning will be issued if the CPU
core voltage change exceeds that level. The available settings are [+/-6%], [+/-
8%] and [Disabled]. The factory default setting is [Disabled].
CPU Warning Temperature [Disabled]
System Warning Temperature [Disabled]
Warning Voltage Vcore A [Disabled]
Warning Voltage Vcore B [Disabled]
Warning Voltage +3.3V [Disabled]
Warning Voltage +5V [Disabled]
Warning Voltage +12V [Disabled]
Warning Voltage -12V [Disabled]
CPU FAN Speed Limit [Disabled]
Power FAN Speed Limit [Disabled]
3.2.10 System Monitor Setup