User manual

Chapter 3 - System Setup
PS-2000B Series User Manual3-16
IRQ-3 assigned to [PCI/ISA PnP]
IRQ-4 assigned to [PCI/ISA PnP]
IRQ-5 assigned to [PCI/ISA PnP]
IRQ-7 assigned to [PCI/ISA PnP]
IRQ-9 assigned to [PCI/ISA PnP]
IRQ-10 assigned to [PCI/ISA PnP]
IRQ-11 assigned to [PCI/ISA PnP]
IRQ-12 assigned to [PCI/ISA PnP]
IRQ-14 assigned to [PCI/ISA PnP]
IRQ-15 assigned to [PCI/ISA PnP]
↑↓→←:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
Phoenix - AwardBIOS CMOS Setup Utility
IRQ Resources
Item Help
Menu Level
Legacy ISA for devices
comPS-Biant with the
original PC AT bus
specification, PCI/ISA
PnP for devices
comPS-Biant with the
PS-Bug and PS-Bay standard
whether designed for
PCI or ISA bus
architecture
Select IRQ Resources from the PnP/ PCI Configurations menu and the following
screen will appear.


 IRQ-3 (4/5/7/9/10/11/12/14/15) assigned to
This setting determines the type of device assigned to the IRQ. This function is
available when the [PnP/ PCI Configurations] menu's [Resources Control By]
option is set to [Manual].
[PCI/ISA PnP] .. Select to use a PnP-ready PCI or ISA card.
[Legacy ISA] .... Select to use a non-PnP ISA card.
The initial settings are all [PCI/ISA PnP].
3.2.8 IRQ Resources