User manual

Chapter 3 - System Setup
PS-2000B Series User Manual 3-13
Selecting the POWER MANAGEMENT SETUP menu item calls up the follow-
ing screen.
↑↓→←:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
Phoenix - AwardBIOS CMOS Setup Utility
Power Management Setup
Item Help
Menu Level
ACPI Function [Enabled]
Power Management [ User Define]
Video Off Method [DPMS ]
Video Off In Suspend [Yes]
Suspend Type [Stop Grant]
Suspend Mode [Disabled]
HDD Power Down [Disabled]
Wake-up by PCI card [Disabled]
**Reload Global Timer Events**
Primary IDE 0 [Disabled]
Primary IDE 1 [Disabled]
Secondary IDE 0 [Disabled]
Secondary IDE 1 [Disabled]
FDD,COM,LPT Port [Disabled]
PCI PIRQ[A-D]# [Disabled]
 ACPI Function
Enables/disables the ACPI feature. Selections are [Enabled] or [Disabled].
[Enabled] is factory set and recommended for most users.

Power Management
You can choose from three power management options. These are [User
Define], [Min Saving] or [Max Saving]. The [User Define] selection is
factory set and recommended for most users.



Video Off Method
This setting determines the method to blank the display screen. The avail-
able settings are [Blank Screen], [V/H SYNC+Blank], and [DPMS Sup-
ported]. The [Blank Screen] selection blanks the display. The [V/H
SYNC+Blank] blanks the display and also suspends the Vertical/Horizontal
synchronization signal of the display. The [DPMS Supported] selection
controls the operation when a CRT that supports DPMS
*1
is used. The
factory default setting is [DPMS] and is recommended for most users.



Video Off In Suspend
Designates how the monitor is blanked. The available settings are [Yes] and
[No]. The factory default setting is [Yes].
3.2.6 Power Management Setup
*1 This standard is approved by the VESA (Video Electronics Standards Association).