User manual

Chapter 1 – PS-B Unit Basics
PS-2000B Series User Manual
1–4


 Display Unit
Pro-face manufactures a Flat Panel Display (FP series) which can be connected with the
PS-B unit.
Some FP display has not only an Analog RGB interface but also a DVI-D interface for
the PS-B unit, and can be connected via Pro-face's 10m DVI-D cable.
For details, refer to the FP's catalogue or Installation manual, or contact your local
Pro-face distributor.


 Commercial-type Products
Commercially available expansion boards (PCI bus compatible boards), key-
boards, mouse units and printers can all be used with the PS-B. Also, the PS-B
unit's built-in USB connector allows USB-type devices to be used as well. How-
ever, some commercial PC peripherals may not be compatible with the PS-B. If
you experience compatibility problems, contact your local Pro-face distributor.
• Be sure to use only DIM modules manufactured by Digital
Electronics Corporation. Certain commercially available DIM
modules will not operate properly in the PS-B unit.
• When using USB-type peripheral devices, be sure to thor-
oughly read that product's instruction manual prior to use.