User manual

PS-2000B Series User Manual
1–1
Chapter
1 PS-B Unit Basics
1. Prior to Operating the PS-B Unit
2. PS-B Unit System Configurations
3. PS-B Unit Part Names and Features
4. Interface
5. PS-B Unit External Views and Dimensions
This chapter describes the procedures required prior to operating the PS-B. It also
explains the types of peripheral devices that can be connected to the PS-B.
1.1 Prior to Operating the PS-B Unit
The following explanation shows the preparation steps required prior to operating
the PS-B.
Connect the display unit and any optional
devices.
1.2 PS-B System Design / 1.3
PS-B Part Names and Features
Connect the PS-B unit's power cord
terminals and turn the power switch ON.
2.3 Wiring
[When PS-B has pre-installed OS]
Configure the PS-B unit's BIOS.
Chapter 3 BIOS Setup
[When PS-B has no preinstalled OS]
Install all required software. For software
installation instructions, refer to the manual
provided with that product.
Install commercial OS to
your PS-B as necessary.
For how to setup the OS,
refer to the manual
provided with the product.
Connect Peripheral Devices
Turn Display On
Connect Power
Set Up the BIOS
Install an OS
Install PS-2000B User Manual
and Driver CD Data
Install Required Device Drivers
Install Required Software
Install the PS-B Unit