User`s guide

Upgrading Your Server’s CPU Module Configuration
5-4
Upgrading to a New CPU Module Configuration
To upgrade:
1. Shut down the operating system software.
2. Turn off your server.
3. Disconnect all external devices, ac power, and monitor power.
4. Unlock and the remove left side panel.
5. Carefully remove the terminator from CPU slot 2 and place in an
antistatic package (see Figure 5-2).
6 Remove the CPU module, two regulators, and retaining bracket
from the antistitic package. Check switch J19 on the CPU module
for the appropriate switch settings.
Refer to Appendix A, “Technical Specifications,” for switch descriptions and
locations.