User`s guide

Server Management
4-4
Obtaining Information Using the SCU
You can use the SCU to check the Serial number, Revision number, and
Asset number for the main logic board, CPU, and memory modules
configured in the server. For example, if you change a module in your
server, you must run the SCU to re-synchronize the System ID (server
model number and serial number) in that module’s memory. The SCU will
check the new module and will detect the System ID mismatch.
You may view the details for a particular module simply by selecting that
module. The Serial number, Revision number and Asset number for that
module displays. The SCU then lists the server model number and server
serial number information stored on that module. You can then confirm the
correct model number and serial number. This data is available on the
label located on the server back panel.
Refer to Appendix C, “SCU Features,” for more detailed information about the
SCU.
Obtaining Information Using Server Management Software
Your Prioris ZX 6000MP Series server is shipped with ServerWORKS
Manager software. ServerWORKS Manager is a workgroup and server
management product for Digital’s family of servers. ServerWORKS
Manager utilizes the Simple Network Management Protocol (SNMP)
environment to assist the Network or Server administrator by constantly
monitoring the network for problems.
ServerWORKS Manager is based on an open architecture that enables
seamless integration and interoperability with popular enterprise
management software packages such as Digital’s POLYCENTER
Manager/NetView, Hewlett-Packard’s OpenView UX for Windows, and
IBM’s Netview/6000 AIX. Also included with ServerWORKS Manager are
Network Operating System (NOS) Agents for Windows NT V3.51, Novell
NetWare V3.12 and V4.x, and SCO UNIX V5.0.