User`s guide

Server Utilities
2-8
Using the SCU
To use the SCU:
1. Turn on your server and allow the POST to complete.
If POST detects an error refer to Chapter 4, “Server Management,”
and take the appropriate steps to correct the problem. After the
problem has been resolved, restart the server.
2. Start the SCU using one of the three methods described
previously.
3. Press [Enter] to display the SCU introductory screen.
NOTE: The SCU contains help pop-up screens for any
selected menu item. Press [F1] at anytime to display a help
screen. Press [Esc] to remove a help screen.
4. If no configuration errors appear, the Welcome screen displays.
Press [Enter] to display the Main menu.
If a configuration error appears, the Welcome screen displays
information about the error and tells you to reconfigure your server.
5. Step through the menu items to familiarize yourself with the SCU.